Точка доступа Cisco WAP351-E-K9

A

C

E

I

J

K

N

P

S

T

FCC (США)

China

ETSI

Israel

TELEC (Japan)

Korea

North America (исключая FCC)

Japan2

Singapore

Taiwan

Specifications

Description

Standards

IEEE 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)

Cabling type

Category 5e or better

Antennas

Internal antennas optimized for installation on a wall or ceiling

LED indicators

Power, WLAN, LAN

Operating system

Linux

Physical Interfaces

Ports

5 10/100/1000 Ethernet, with support for 802.3af /at PoE, Power Port for AC adapter (not included)

Power Supply

802.3af/at PoE and External 48V/1.25A DC power adapter (not included)

Buttons

Reset button, Power On/Off

Lock slot

Slot for Kensington lock

Physical Specifications

Physical dimensions (W x D x H)

9.055 x 9.055 x 1.575 in. (230 x 230 x 40 mm)

Weight

1.34 lb or 0.607 kg

Network Capabilities

VLAN support

Yes

Number of VLANs

1 management VLAN plus 16 VLANs for SSIDs

802.1X supplicant

Yes

SSID-to-VLAN mapping

Yes

Auto channel selection

Yes

Spanning Tree

Yes

Load balancing

Yes

IPv6

Yes

●  IPv6 host support

●  IPv6 RADIUS, syslog, Network Time Protocol (NTP), etc.

Layer 2

802.1Q-based VLANS, 16 active VLANS plus 1 management VLAN

Security

WPA/WPA2

Yes, including Enterprise authentication

Access control

Yes, management access control list (ACL) plus MAC ACL

Secure management

HTTPS

SSID broadcast

Yes

Rogue-access-point detection

Yes

Mounting and Physical Security

Multiple mounting options

Mounting bracket included for easy ceiling or wall mounting

Physical security lock

Kensington lock slot

Quality of Service

Quality of service (QoS)

Wi-Fi Multimedia and Traffic Specification (WMM TSPEC), Client QoS

Performance

Wireless throughput

Up to 300-Mbps data rate (real-world throughput will vary)

Recommended user support

32 active clients/users per radio

Multiple-Access Point Management

Single Point Setup

Yes

Number of access points per cluster

8

Active clients per cluster

240

Configuration

Web user interface

Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)

Management

Management protocols

Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour

Remote management

Yes

Event logging

Local, remote syslog, email alerts

Network diagnostics

Logging and packet capture

Web firmware upgrade

Firmware upgradable through web browser, imported/exported configuration file

Dynamic Host Configuration Protocol (DHCP)

DHCP client

IPv6 host

Yes

HTTP redirect

Yes

Wireless

Frequency

Dual concurrent radios (2.4 and 5 GHz)

Radio and modulation type

Dual radio, orthogonal frequency division multiplexing (OFDM)

WLAN

802.11n

2x3 multiple-input multiple-output (MIMO) with 2 spatial streams on 2.4 GHz

2x2 multiple-input multiple-output (MIMO) with 2 spatial streams on 5 GHz

20, and 40 MHz for 802.11n

PHY data rate up to 600 Mbps

Data rates supported

802.11a/b/g:

●  54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, and 1 Mbps

●  802.11n: 6.5 to 300 Mbps

◦   20-MHz bandwidth: MCS 0-15 for supported data rates

◦   40-MHz bandwidth: MCS 0-15 for supported data rates

Frequency band and 20-MHz operating channels

A Regulatory Domain:

●  2.412 to 2.462 GHz; 11 channels

●  5.180 to 5.240 GHz; 4 channels

●  5.745 to 5.825 GHz; 5 channels

E Regulatory Domain:

●  2.412 to 2.472 GHz; 13 channels

●  5.180 to 5.240 GHz; 4 channels

C Regulatory Domain:

●  2.412 to 2.462 GHz; 11 channels

●  5.745 to 5.805 GHz; 4 channels

Nonoverlapping channels

2.4 GHz

●  802.11b/g

◦   20 MHz: 3

●  802.11n

◦   20 MHz: 3

5 GHz

●  802.11a

◦   20 MHz: 9

●  802.11n

◦   20 MHz: 9

◦   40 MHz: 4

Wireless isolation

Wireless isolation between clients

External antennas

None

Internal antennas

Internal Fixed PiFA Antenna

Antenna gain in dBi

Maximum antenna gain of 5.3 dBi on 2.4 GHz

Maximum antenna gain of 5.1 dBi on 5 GHz

Wireless distribution system (WDS)

Yes

Roaming

802.11i only

Multiple SSIDs

16

Wireless VLAN map

Yes

WLAN security

Yes

Wi-Fi Multimedia (WMM)

Yes, with unscheduled automatic power save

Operating Modes

Access point

Access Point mode, WDS Bridging, Workgroup Bridge mode

Environmental

Power options

IEEE 802.3af/af Ethernet switch

Cisco Power Injector - SB-PWR-INJ2-xx

AC Adapter - SB-PWR-48V-xx (not included)

PoE power:

Peak PoE power: 18W

Compliance

Safety:

●  UL 60950-1

●  CAN/CSA-C22.2 No. 60950-1

●  IEC 60950-1

●  EN 60950-1

Radio approvals:

●  FCC Part 15.247, 15.407

●  RSS-210 (Canada)

●  EN 300.328, EN 301.893 (Europe)

●  AS/NZS 4268.2003 (Australia and New Zealand)

EMI and susceptibility (Class B):

●  FCC Part 15.107 and 15.109

●  ICES-003 (Canada)

●  EN 301.489-1 and -17 (Europe)

Operating temperature

0° to 40°C (32° to 104°F)

Storage temperature

-20° to 70°C (-4° to 158°F)

Operating humidity

10% to 85% noncondensing

Storage humidity

5% to 90% noncondensing

System memory

128-MB RAM

128-MB Flash

Package Contents

●  CiscoWAP351 Wireless-N Dual Radio Access Point

●  Ceiling-/wall-mounting kit

●  User guide on CD-ROM

●  Quick-start guide

●  Ethernet network cable

Minimum Requirements

●  Switch or router with PoE support, PoE injector, or AC Power Adapter

●  Web-based configuration: Java-enabled web browser