Интерфейсный модуль Cisco IRM-1100-SPMI

Memory

Default and maximum DRAM

4 GB

Default and maximum Flash memory

8 GB (physical) / 4 GB (usable)

Ingress protection rating

IP30

Physical characteristics

Physical dimensions (H x W x D)

Chassis

Expansion Module

2.36 in. x 5.22 in. x 4.92 in. (60 x 132.5 x 124.9 mm)

1.3 in. x 5.2 in. x 4.9 in. (33 x 132 x 124 mm)

Weight

Chassis

Expansion Module

IRM-1100-SPMI:

IRM-1100-SP:

2.25 lbs (1.02 kg)

1.65 lbs (0.75 kg)

1.45 lbs (0.66 kg)

Mounting options

Panel, wall, and din rail (vertical and horizontal) mount

Power specifications

Nominal voltage: 12V to 48V DC

Minimum and maximum input voltage: 9.6-60V DC

Maximum and minimum input current: 1.24A (9.6V DC) and 0.26A (60V DC)

Power consumption

At idle: 6.6W

Typical: 9.8W

Maximum: 12W

Additional 10W (typical) with expansion module and 2^nd cellular

Interfaces on the base platform

Console

Mini type-B USB

WAN interfaces

●  Combo 10/100/1000 Gigabit Ethernet port (RJ45 and SFP) on the base platform

●  An additional 10/100/1000 Gigabit Ethernet SFP on the expansion module. Refer to Table 8 for supported SFPs

●  LTE: Modular with options for single and dual active LTE and LTE-Advanced

LAN interfaces

●  Four 10/100BASE-T Fast Ethernet ports

Input and output

●  ALARM input port

LEDs

●  System OK

●  Link for Ethernet WAN ports

●  VPN

●  Tricolor user-configurable LED

●  ALARM

Serial interface

●  Isolated RS-232 RJ45 DTE port

●  Support for asynchronous mode with speeds up to 115,200 baud

Serial protocols

SCADA, DNP3, T101-104, Raw Socket TCP, and UDP

Environmental characteristics

Environmental operating temperature range

–40 to 140°F (–40 to 60°C) in a sealed NEMA cabinet with no airflow

–40 to 158°F (–40 to 70°C) in a vented cabinet with 40 Linear Feet per Minute (LFM) of air

–40 to 167°F (–40 to 75°C) in a forced air enclosure with 200 LFM of air

Type tested at 85°C for 16 hours

Operating altitude

40°C up to 13,800 ft (operating) per IEC 68-2-41

Non-operating shock and vibration

●  50-60G (3.76 m/s minimum)

●  3-500Hz at 1.12 GRMS (BP at 10 and 100 Hz)

Standard safety certifications

●  UL 60950-1, 2 ^nd edition

●  CAN/CSA C22.2 No. 60950-1, 2 ^nd edition

●  EN 60950-1, 2 ^nd edition

●  CB to IEC 60950-1, 2 ^nd edition with all group differences and national deviations

Hazardous locations standards

●  ANSI/ISA 12.12.01 (Class 1, Div 2 A-D)

●  CSA 213 (Class 1, Div 2 A-D)

●  IEC 60079-0 and -15 IECEx test report (Class I, Zone 2, gas groups IIC)

●  EN 60079-0 and -15 ATEX certification (Class I, Zone 2, gas groups IIC)

Industry standards

●  IEC 61850-3

●  IEEE 1613

EMC emissions CLASS A

●  47 CFR Part 15 B

●  EN 55032:2015

●  CISPR 32 Edition 2

●  CNS13438: 2006

●  EN 300 386 V1.6.1

●  ICES-003 Issue 6: 2016

●  KN 32: 2015

●  TCVN 7189: 2009

●  V-2/2015.04

●  V-3/2015.04

●  AS/NZ CISPR32

EMC immunity

●  EN 61000-4-2, 3, 4, 5, 6, 8, 9, 16, 17, 18, and 29

●  CISPR24: 2010 + A1: 2015

●  EN 300 386 V1.6.1

●  EN 55024: 2010 + A1: 2015 

●  EN 55035:2017

●  KN35: 2015

●  TCVN 7317:2003

●  QCVN 18:2014