Прийом замовлень:
9:00 - 19:00 Пн-Пт
Замовлення по телефонам:
+38 (044) 49-400-85
+38 (063) 49-400-85
+38 (050) 87-165-11
skype
[email protected]
 
Кошик порожній
 

Коммутатор Cisco Meraki MS225-48LP-HW

Коммутатор Cisco Meraki MS225-48LP-HW
Натисніть, щоб збільшити
GPL $6,939.00
Цена уточняйте
Артикул: MS225-48LP-HW
Виробник: Cisco

Коммутаторы Cisco семейства Meraki созданы для крупных предприятий и объединяют в себе производительность и гибкость. Cisco CloudManagement позволит, после подключения сетевого кабеля, удалённо произвести настройку коммутатора через облачные приложения, не затрачивая дополнительных средств на конфигурацию устройства. Также, предоставляет набор инструментов для управления и мониторинга сетями.

Технические характеристики коммутатора Cisco Meraki MS225-48LP-HW

Model

Idle / Full Load Power

Available PoE/PoE+ Power

Power Supply Configuration

MS225-48LP-HW

53 / 490 W

370 W

Fixed internal

Interfaces

  • 48 × 10/100/1000BASE-T Ethernet (RJ45) with auto-MDIX crossover
  • 802.3af/802.3at Power-over-Ethernet (PoE/PoE+) on MS225-48 LP/FP, available on all ports (maximum of 30W per port for PoE+)
  • 4 × SFP+ 10 Gigabit Ethernet interfaces for uplink
  • 2 × Stacking interfaces
  • Auto negotiation and crossover detection

Management

  • Managed via the cloud using the Meraki dashboard
  • Integrated with Meraki Wireless and complete portfolio of IT products and solutions
  • No-touch remote deployment (no staging needed)
  • Detailed historical per-port and per-client usage statistics
  • DHCP, client, and hostname fingerprinting
  • SNMPd and SYSLOG support for integration with other network management solutions
  • Seamless over-the-web firmware upgrades with scheduling & control

Remote diagnostics

  • Email, SMS and Mobile push notification alerts
  • Cable testing and link failure detection with alerting
  • Live remote packet capture
  • Dynamic and interactive network discovery and topology
  • Aggregated event logs with instant search

Flexible stacking

  • Physical stacking of up to 8 switches with 80 Gbps stack bandwidth on all models
  • Virtual stacking supports thousands of switch ports in a single logical stack for unified management, monitoring, and configuration

Ethernet switching capabilities

  • 802.1p Quality of Service prioritization
  • 802.1Q VLAN tagging with 4,095 addressable tags
  • 802.1w, 802.1D Rapid Spanning Tree Protocol (RSTP, STP)
  • Broadcast storm control
  • 802.1ab Link Layer Discovery Protocol (LLDP) and Cisco Discovery Protocol (CDP)
  • 802.3ad link aggregation with up to 8 ports per aggregate, Multichassis aggregates supported on stacked switches
  • IGMP snooping for multicast filtering
  • MAC forwarding entries: 16K on 24-port models, 32K on 48-port models

Security

  • Integrated two-factor authentication for Dashboard management
  • Role-based access control (RBAC) with granular device and configuration control
  • Corporate wide password policy enforcement
  • IEEE 802.1X RADIUS, hybrid authentication and RADIUS server testing
  • MAC-based RADIUS authentication (MAB)
  • Port security: Sticky MAC, MAC whitelisting
  • DHCP snooping, detection and blocking
  • STP Enhancements: BPDU guard, Root guard
  • IPv4 ACLs

Power over Ethernet:

  • 802.3af (PoE) 15.4 W per port and 802.3at (PoE+) 30 W per port
  • Maximum PoE output (48LP/48FP): 370 / 740 W
  • PoE available on all ports simultaneously

Performance

  • Non-blocking switching fabric
  • Switching capacity: 128Gbps (24-port models), 176Gbps (48-port models)
  • Forwarding rate (mpps): 95.24 (24-port models), 127.98 (48-port models)
  • Jumbo Frame Support (9578 byte Ethernet frame)
  • Flow control support

Layer 3

  • Static Routing (maximum of 16 static routes supported)
  • DHCP Relay

Power

  • Power input: 100 - 240 VAC, 47-63 Hz
  • Power consumption: 25 - 882 W
  • RPS interface: Requires RPS-2300 chassis, see Cisco RPS-2300 Datasheet for further information

Mounting

  • 1U Rack-mountable with included rack mount hardware
  • 2-post front mounting options available
  • Desktop-mountable with included feet

Environment

  • Operating temperature: 32°F to 104°F (0°C to 40°C)
  • Humidity: 5 to 95% non-condensing
  • MS225-24, MS225-48 feature fanless operation

Regulatory

  • CSA-US (US, Canada)
  • FCC (USA)
  • IC (Canada)
  • CE (Europe)
  • RCM (Australia/New Zealand)
  • RoHS

Warranty

  • Full lifetime hardware warranty with next-day advanced replacement included

MTBF at 25°C

  • MS225-48: 439,585
  • MS225-48LP: 381,015
  • MS225-48FP: 320,555

Physical dimensions (H×W×D)

  • MS225-48: 1.72 x 19.08 x 13.38”(4.38 x 48.46 x 34cm)
  • MS225-48LP: 1.72” x 19.08” x 13.38”(4.38 x 48.46 x 34cm)
  • MS225-48FP: 1.72” x 19.08” x 13.38”(4.38 x 48.46 x 34cm)

Physical Weight

  • MS225-48: 8.78 lb (3.98 kg)
  • MS225-48LP: 9.63 lb (4.37 kg)
  • MS225-48FP: 9.63 lb (4.37 kg)
Для цього товару немає додаткових зображень