Точка доступу Cisco Meraki MR56-HW

Category

Specifications

Radios

·          2.4 GHz 802.11b/g/n/ax client access radio 

·         5 GHz 802.11a/n/ac/ax client access radio 

·          2.4 GHz & 5 GHz dual-band WIDS/WIPS, spectrum analysis, & location analytics radio

·           2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support

·          Concurrent operation of all four radios

·          Supported frequency bands (country-specific restrictions apply)

·          Supported frequency bands (country-specific restrictions apply):

o    2.412-2.484 GHz 

o    5.150-5.250 GHz (UNII-1) 

o    5.250-5.350 GHZ (UNII-2) 

o    5.470-5.600, 5.660-5.725 GHz (UNII-2e) 

o    5.725 -5.825 GHz (UNII-3) 

Antenna

·          Internal Antenna (5.4 dBi gain at 2.4 GHz, 6 dBi gain at 5 GHz) 

802.11ax, 802.11ac Wave 2 and 802.11n Capabilities 

·        DL-OFDMA**, UL-OFDMA**, TWT support**, BSS Coloring** 

·          8 x 8 multiple input, multiple output (MIMO) with eight spatial streams on 5GHz

·         4 x 4 multiple input, multiple output (MIMO) with four spatial streams on 2.4GHz

·      SU-MIMO, UL MU-MIMO** та DL MU-MIMO support 

·          Maximal ratio combining (MRC) & beamforming 

·          20 and 40 MHz channels (802.11n); 20, 40, і 80 МГц канали (802.11ac Wave 2); 20, 40 and 80 MHz channels (802.11ax) 

·          Up to 1024-QAM on both 2.4 GHz & 5 GHz bands 

·          Packet aggregation 

Power

·          Power over Ethernet: 42.5 - 57 V (802.at compliant)

·         Alternative: 12 V DC input 

·          Power consumption: 22W max (802.3at)

·          Power over Ethernet injector and DC adapter sold separately

Interfaces

·          1x 100/1000/2.5G/5G BASE-T Ethernet (RJ45)

·          1x DC power connector (5.5 mm x 2.5 mm, center positive)

Mounting

·          All standard mounting hardware included 

·          Desktop, ceiling, and wall mount capable 

·          Ceiling tile rail (9/16, 15/16 or 1 1⁄2” flush or recessed rails), assorted cable junction boxes 

·          Bubble level on mounting cradle for accurate horizontal wall mounting

Physical Security

·          Two security screw options (included) (3.5 mm long and 2.5 mm diameter and 5 mm head) 

·          Kensington lock hard point 

·          Concealed mount plate with anti-tamper cable bay

Environment

·          Operating temperature: 32 °F to 104 °F (0 °C to 40 °C)

·         Humidity: 5 to 95% non-condensing 

Physical Dimensions

·          12.83” x 5.54” x 1.76” (32.6 cm x 14.079 cm x 4.47 cm), не включаючи робочий стіл або mount plate

·          Weight: 1 kg

Security

·          Integrated Layer 7 firewall with mobile device policy management >

·          Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal

·          Flexible guest access with device isolation 

·          PCI compliance reporting 

·         EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM

·          TKIP and AES encryption 

·          Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration 

·          Cisco ISE integration for Guest access and BYOD Posturing 

Quality of Service

·      Advanced Power Save (U-APSD)

·         WMM Access Categories with DSCP and 802.1p support 

·          Layer 7 application traffic identification and shaping 

Mobility

·          PMK, OKC, & 802.11r for fast Layer 2 roaming 

·          Distributed or centralized layer 3 roaming

Analytics

·         Embedded location analytics reporting and device tracking 

·          Global L7 traffic analytics reporting network, per device, & per application

LED Indicators

·          1 power/booting/firmware upgrade status

Regulatory

·                              

·          For additional country-specific regulatory information, please contact Meraki sales

Warranty

·          Lifetime hardware warranty with advanced replacement included

Ordering Information

·          Note: Meraki access point license required.