Точка доступу Cisco Meraki MR33-HW

Технічні характеристики точки доступуCisco Meraki MR33-HW:

Radios

• 2.4 GHz 802.11b/g/n/ac client access radio
• 5 GHz 802.11a/n/ac client access radio
• 2.4 GHz & 5 GHz WIDS/WIPS, spectrum analysis, and location analytics radio
• 2.4 GHz Bluetooth Low Energy (BLE) радіо with beacon and BLE scanning support
• Concurrent operations of all four radios

Operating Bands

• 2.412-2.484 GHz
• 5.150-5.250 GHz (UNII-1)
• 5.250-5.350 GHZ (UNII-2)
• 5.470-5.600, 5.660-5.725 GHz (UNII-2e)
• 5.725 - 5.825 GHz (UNII-3)

802.11ac & 802.11n Capabilities

• 2x2 multiple input, multiple output (MIMO) with 2 spatial streams
• Maximal ratio combining (MRC)
• Beamforming
• 20 and 40 MHz channels (802.11n), 20, 40, and 80 MHz channels (802.11ac)
• Up to 256 QAM on both 2.4 GHz and 5 GHz bands
• Packet aggregation

Power

• Power over Ethernet: 37 - 57 V (802.3af compatible)
• Alternative 12 V DC input
• Power consumption: 11W max (802.3af)
• Power over Ethernet injector and DC Adapter Sold Separately

Mounting

• All standard mounting hardware included
• Desktop, ceiling, and wall mount capable
• Ceiling tile rail ( 9/16, 15/16 or 1 ½” flush or recessed rails), assorted cable junction boxes strong>Physical Security
  • Двоє знімків знімків (included)
  • Kensington lock hard point
  • Concealed mount plate with anti-tamper cable bay

  Environment

  • Operating temperature: 32 °F to 104 °F (0 °C to 40 °C)
  • Humidity: 5 to 95% non-condensing

  Physical Dimensions

  • 8.5” x 4.3 ” x 1.3 ” (215 мм х 110 мм х 32 мм), не включаючи робочий стіл або плачевий пластину
  • Weight: 13.2 oz (376.5 g)

  Antenna

  • Integrated omni-directional antennas (3.8 dBi gain at 2.4 GHz, 3.9 dBi gain at 5 GHz)

  Interfaces strong>

  • 1 × 10/100/1000 BASE-T Ethernet (RJ45)
  • 1 × DC Power connector (5.5 mm x 2.5 mm, center positive) li>

  Security

  • Integrated layer 7 firewall with mobile device policy management
  • Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
  • Flexible guest access with device isolation
  • VLAN tagging (802.1Q) and tunneling with IPSec VPN
  • PCI compliance reporting
  • WEP, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X
  • EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
  • TKIP and AES encryption
  • Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration

  Qual ity of Service

  • Advanced Power Save (U-APSD)
  • WMM Access Categories with DSCP and 802.1p support
  • Layer 7 application traffic identification and shaping

  Mobility

  • PMK, OKC, and 802.11r for fast Layer 2 roaming
  • Distributed or centralized layer 3 roaming

  LED Indicators

  • 4x 2 Ethernet status for Ethernet ports
  • 1 power/booting/firmware upgrade status