Маршрутизатор Cisco NCS-6008-SYS-S

eature

Description

Software compatibility

Cisco IOS XR Software Release 5.0 or later running in the Cisco nVisor environment

Protocols

●  Cisco Discovery Protocol

●  IPv4 and IPv6 addressing

●  Internet Control Message Protocol (ICMP)

●  Layer 3 routing protocols, including Border Gateway Protocol Version 4 (BGPv4), Open Shortest Path First Version 2 (OSPFv2), OSPFv3, and Intermediate System-to-Intermediate System (IS-IS) Protocol

●  Multicast forwarding with support for source-based and shared distribution trees and the following protocols:

◦   Protocol Independent Multicast Sparse Mode (PIM-SM)

◦   Bi-directional PIM (Bidir-PIM)

◦   PIM Source Specific Multicast (PIM SSM)

◦   Automatic route processing (AutoRP)

◦   Internet Group Management Protocol (IGMP) versions, 2 and 3

◦   Multiprotocol BGP (MBGP)

◦   Multicast Source Discovery Protocol (MSDP)

●  Multiprotocol Label Switching (MPLS)

◦   MPLS Label Distribution Protocol (LDP)

◦   Resource Reservation Protocol (RSVP)

◦   Diffserv Aware Traffic Engineering (TE)

●  MPLS Traffic Engineering control plane (RFCs 2702 and 2430)

●  Segment Routing

●  Route Policy Language (RPL)

●  MPLS Traffic Engineering control plane

●  Management:

◦   Simple Network Management Protocol (SNMP)

◦   Programmatic interfaces (XML)

◦   Model Driven Telemetry

◦   Netconf/Yang

●  Security

◦   Message Digest Algorithm (MD5)

◦   IP Security (IPsec) Protocol

◦   Secure Shell Protocol Version 2 (SSHv2)

◦   Secure FTP (SFTP)

◦   Secure Sockets Layer (SSL)

●  Ethernet

◦   100 Gigabit Ethernet IEEE 802.3

◦   40 Gigabit Ethernet IEEE 802.3

◦   10 Gigabit Ethernet IEEE 802.3

◦   Support for short- and long-reach IEEE standards

Components

Each Cisco NCS 6008 line card chassis includes:

●  Standalone chassis (no rack required)

●  2 route processors

●  6 fabric cards

●  8 line card slots

●  2 fan trays

●  Air inlet filter

●  6 power shelves (DC or AC)

Fabric Cards

●  6 Fabric cards support 5+1 redundancy

●  System can sustain more than one fabric card failure

●  Universal Fabric card (2T & 1T) OR Single-chassis Fabric Card (1T)

●  Universal Fabric card OR Multi-chassis Fabric card (legacy option). 16 optical connections to the Cisco NCS 6000 Series Fabric Chassis

Line cards

100-G line cards

●  20 x 100 Gigabit Ethernet -multiservice cards with combo optics (CPAK & QSFP)

●  20 x 100 Gigabit Ethernet LSR cards with combo optics (CPAK & QSFP)

●  10 x 100 Gigabit Ethernet -multiservice cards with CPAK optics

●  10 x 100 Gigabit Ethernet LSR cards with CPAK optics

10-G line cards

●  60 x 10 - Gigabit Ethernet multiservice cards with Enhanced Small Form-Factor Pluggable (SFP+) optics

●  60 x 10 - Gigabit Ethernet LSR cards with Enhanced Small Form-Factor Pluggable (SFP+) optics

Connectivity

100 and 10 Gigabit Ethernet on 100-Gbps line cards using breakout or patch panel solutions

Features and functions

IP features:

●  IPv4 unicast services

●  IPv6 unicast services

●  IPv4/IPv6 equal-cost multipathing (ECMP)

●  IPv4/IPv6 load balancing)

Forwarding features:

●  Access control lists (ACLs)

●  Qos and class of service (CoS) using modular QoS command-line interface (CLI; MQC)

●  IP packet classification and marking

●  Queuing (ingress and egress)

●  Policing (ingress and egress)

●  Diagnostic and network management support

IPv4 multicast features:

●  Multicast reverse path forwarding (RPF)

●  Multicast nonstop forwarding (NSF)

●  Multicast forwarding information base (MFIB)

MPLS features:

●  MPLS forwarding

●  MPLS load balancing

●  User network interface (UNI)

●  Link management protocol (LMP)

Security features:

●  Control packet policing

●  Dynamic control plane protection

●  GTSM RFC 3682 (formerly BTSH)

System capacity

4 Tbps per line card capability (2 Tbps per slot ingress and 2 Tbps per slot egress) for a total switching capacity of 32 Tbps in a Single Chassis configuration

Up to 1Pbps total switching capacity in a multi-chassis configuration

Reliability and availability

System redundancy:

●  Power redundancy 1:1 or 1:N

●  Fan tray redundancy 1:1

●  Route processor redundancy 1:1

●  Fabric card redundancy 1:6

Software features:

●  NSF using graceful restart for IS-IS, OSPF, BGP, LDP, and RSVP

●  Line-card online insertion and removal (OIR) support

●  Fabric card OIR support

●  Out of resource management

●  Virtual machine redundancy

●  MPLS Fast Reroute (FRR)

●  Hot Standby Router Protocol (HSRP) and Virtual Router Redundancy ProtocolVRRP)

MIBs

SNMP framework support:

●  SNMPv1

●  SNMPv2c

●  SNMPv3

●  MIB II, including interface extensions (RFC 1213)

●  SNMP-FRAMEWORK-MIB

●  SNMP-TARGET-MIB

●  SNMP-NOTIFICATION-MIB

●  SNMP-USM-MIB

●  SNMP-VACM-MIB

System management:

●  CISCO- BULK-FILE-MIB

●  CISCO-CONFIG-COPY-MIB

●  CISCO-CONFIG-MAN-MIB

●  CISCO-FLASH-MIB

●  CISCO-MEMORY-POOL-MIB

●  Cisco FTP Client MIB

●  Cisco Process MIB

●  Cisco Syslog MIB

●  CISCO-SYSTEM-MIB

●  CISCO-CDP-MIB

●  IF-MIB (RFC 2233/RFC 2863)

QoS:

●  MQC-MIB (Cisco Class-Based QoS MIB)

●  CISCO-PING-MIB

Chassis:

●  ENTITY-MIB (RFC 2737)

●  CISCO-entity-asset-MIB

●  CISCO-entity-sensor-MIB

●  CISCO-FRU-MIB (Cisco-Entity-FRU-Control-MIB)

Fabric:

●  CISCO-Fabric-Mcast-MIB

●  CISCO-Fabric-Mcast-Appl-MIB

Routing protocols:

●  BGP4-MIB Version 1

●  OSPFv1-MIB (RFC 1253)

●  CISCO-IETF-IP-FORWARDING-MIB

●  IP-MIB (was RFC 2011-MIB)

●  TCP-MIB (RFC 2012)

●  UDP-MIB

●  CISCO-HSRP-EXT-MIB

●  CISCO-HSRP-MIB

Traps:

●  RFC 1157

●  Authentication

●  Linkup

●  Linkdown

●  ColdstartWarmstart

Network management

Enhanced CLI

XML interface

Simple Network Management Protocol (SNMP) and MIB support

Cisco Prime™ Network

Netconf/Yang

Model Driven Telemetry

Programmatic interfaces

XML schema support

Physical dimensions

Chassis height:

●  84 in. (213.36 cm)

Chassis width:

●  23.6 in. (59.94 cm)

Chassis depth: (inclusive of external cosmetic doors)

●  42 in. (106.68 cm)

Power

●  Support for both DC and AC power modules[1] (AC ranges:200-240V; 50-60 Hz; 16A maximumWorldwide ranging DC (-40 to
-72V; 50A nominal, and 60A maximum)

Environmental conditions

Storage temperature: -40 to 158°F (-40 to 70°C)

Operating temperature:

●  Normal: 41 to 104°F (5 to 40°C)

●  Short term*: 23 to 122°F (-5 to 50°C) (see note)

Relative humidity:

●  Normal: 5 to 85%

●  Short-term*: 5 to 90% but not to exceed 0.024 kg water per kg of dry air