Коммутатор Cisco WS-C2960+48TC-L

Manufacturer:

Cisco

Product ID:

WS-C2960+48TC-L

Product Description:

Cisco Catalyst 2960 Plus 48 10/100 + 2 T/SFP LAN Base

Product Type:

Ethernet Switch

Interfaces/Ports

Total Number of Network Ports:

48

Uplink Port:

Yes

Number of Network (RJ-45) Ports:

48

Port/Expansion Slot Details:

48 x Fast Ethernet Network

2 x Gigabit Ethernet Uplink

2 x Fast Ethernet Expansion Slot

Media & Performance

Media Type Supported:

Twisted Pair

Twisted Pair Cable Standard:

Category 5

Ethernet Technology:

Fast Ethernet

Network Technology:

10Base-T

10/100/1000Base-T

I/O Expansions

Number of Total Expansion Slots:

2

Expansion Slot Type:

SFP

Number of SFP Slots:

2

Network & Communication

Layer Supported:

2

Management & Protocols

Manageable:

Yes

Management:

• Cisco Network Assistant
• CiscoWorks Support
• Device manager
• Cisco Express Setup
• CiscoView application
• Cisco Network Assistant Software
• Remote Monitoring (RMON)
• Trivial File Transfer Protocol (TFTP) reduces the cost of administering software upgrades by downloading from a centralized location
• Network Timing Protocol (NTP) provides an accurate and consistent timestamp to all intranet switches
• Cisco IOS CLI support provides a common user interface and command set with all Cisco routers and Cisco Catalyst desktop switches
• Cisco Service Assurance Agent (SAA) support facilitates service-level management throughout the LAN
• Switching Database Manager templates for security and QoS allow administrators to easily adjust memory allocation to the desired features based on deployment-specific requirements
• VLAN trunks can be created from any port using standards-based 802.1q tagging
• Up to 255 VLANs per switch or stack and up to 128 spanning-tree instances per switch are supported.
• Four thousand VLAN IDs are supported
• Voice VLAN simplifies telephony installations by keeping voice traffic on a separate VLAN for easier administration and troubleshooting
• Cisco VTP supports dynamic VLANs and dynamic trunk configuration across all switches
• SNMP v1, v2c, and v3 and Telnet interface support delivers comprehensive in-band management, and a CLI-based management console provides detailed out-of-band management
• Cisco Discovery Protocol Versions 1 and 2 help enable a CiscoWorks network-management station for automatic switch discovery

Memory

Standard Memory:

64 MB

Memory Technology:

DRAM

Flash Memory:

32 MB

Power Description

Input Voltage:

110 V AC

220 V AC

Power Source:

Power Supply

Redundant Power Supply Supported:

Yes

Physical Characteristics

Form Factor:

Rack-mountable

Wall Mountable

Desktop

Height:

1.7"

Width:

17.5"

Depth:

9.3"

Weight (Approximate):

8 lb

Miscellaneous

Package Contents:

• Catalyst 2960-48TC Managed Ethernet Switch
• Console Cable
• AC Power Cord
• 4 x Rubber Mounting Feet
• Documentation
• 2 x 19 inch Mounting Brackets
• 4 x Number-12 Phillips Machine Screws
• 4 x Number-8 Phillips Truss-head Screws
• 6 x Number-8 Phillips Flat-head Screws
• Connector Cover for RPS
• 2 x Number-4 Pan-head Screws
• Cable Guide
• 1 x Black Phillips Machine Screws

Additional Information:

• Dual-purpose uplink port has one 10/100/1000 Ethernet port and one Small Form-Factor Pluggable (SFP)-based Gigabit Ethernet port, with one port active at a time
• LAN Base Image installed
• Configurable up to 8000 MAC addresses
• Configurable up to 255 IGMP groups
• Superior Redundancy for Fault Backup
• Integrated Cisco IOS Software Features for Bandwidth Optimization
• Advanced QoS
• Granular Rate Limiting
• Networkwide Security Features