Точка доступу Cisco Meraki MR45-HW

Radios:

2.4 GHz 802.11b/g/n/ac client access radio

5 GHz 802.11a/n/ac Wave 2 client access radio 2.4 GHz & 5 GHz dual-band WIDS/WIPS, spectrum analysis, and location analytics radio

2.4 GHz Bluetoth Low Energy (BLE) radio with Beacon and BLE scanning support Concurrent operation of all three radios

Supported frequency bands (country-specific restrictions apply):

2.412-2.484 GHz

5.150-5.250 GHz (UNII- 1)

5.250-5.350 GHz (UNII-2)

5.470-5.6 00, 5.660-5.725 GHz (UNII-2e)

5.1725-5.825 GHz (UNII-3)

Antenna:

Internal omni antennas (5.4 dBi gain at 2.4 GHz, 6 dBi gain at 5 GHz)

Individual antenna elements for each radio

802.11ax Compatible, 802.11ac Wave 2 and 802.11n Capabilities:

DL -OFDMA, TWT support

4 x 4 multiple input, multiple output (MIMO ) with four spatial streams

SU-MIMO and DL MU-MIMO support

Maximal ratio combining (MRC) and beamforming

20 and 40 MHz channels (802.11n); 20, 40, and 80 MHz channels (802.11ac Wave 2)

Up to 1024-QAM on both 2.4 GHz & 5 GHz bands

Packet aggregation

Power:

Power over Ethernet: 42.5-57 V (802.3at compliant)

Alternative 12 V DC input

Power consumption: 18 W max

Power over Ethernet injector and DC adapter sold separately

Interfaces:

1x 1000/2.5G BASE-T Ethernet

1x DC Power connector (5.5 mm x 2.5 mm, центр positive)

Mounting:

All standard mounting hardware included

Desktop, ceiling, and wall mount capable

Ceiling tile rail (9/16, 15/16 , or 1 1/2” flush or recessed rails), assorted cable j unction boxes

Bubble level on mounting cradle for accurate horizontal wall mounting

Physical Security:

Два знімки шрифта включають 13.5 mm long, 2.5 mm diameter, 5 mm head

Kensington lock hard point

Concealed mount plate with anti-tamper cable bay

Environment:

Operating temperature: 32 °F - 104 °F (0 °C - 40 °C)

Humidity: 5% to 95%

Physical Dimensions:

12.05” x 5.06” x 1.74” (30.6 cm x 12.84 cm x 4.426 cm), не включаючи робочий стіл або mount plate

Weight: 28.22 oz (800 g)

Security:

Integrated Layer 7 firewall with mobile device policy management

Real-time WIDS/WIPS with alerting and automatic rogue AP розміщення з Air Marshal

Flexible guest access with device isolation

VLAN tagging (802.1Q) and tunneling with IPSec VPN

PCI compliance reporting

WEP, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X

EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM

TKIP and AES encryption

Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration

Cisco ISE integration for guest access and BYOD posturing

Quality of Service:

Advanced Power Save (U-APSD)

WMM Access Categories with DSCP and 802.1p support

Layer 7 application traffic identification and shaping

Mobility:

PMK, OKC, and 802.11r for fast Layer 2 roaming

Distributed or centralized Layer 3 roaming

Analytics:

Embedded location analytics reporting and device tracking

Global L7 traffic analytics reporting на мережі, на пристрої, і на застосування

LED Indicators:

1 power/booting/firmware upgrade status

Regulatory:

RoHS

For additional country-specific regulatory information, please contact Meraki Sales

Compliance:

EN 60601-1-2 EMC requirements for the Medical Directive 93/42/EEC

Ordering Information:

MR45- HW: Meraki MR45 Cloud Managed 802.11ax Compatible AP

-XX: Meraki AC Adapter for MR Series (XX = US/EU/UK/AU)

MA-INJ-4-XX: Meraki Gigabit 802.3at Power over Ethernet Injector (XX = US/EU/UK/AU)

MA-I NJ-5-XX: Meraki Multigigabit 802.3at Power over Ethernet Injector (XX = US/EU/UK/AU)

Note: Meraki access point license required